Media Library / Images

TW hose assembly, airport depot

Hot stamping process, production TW coupling parts

TGN 2" Al (TGN 50 Al)

Tank truck flange aluminium, one end flange to DIN 28462, other end male BSP thread.

ERV-R 50.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

TWD-W coupling seal

NBR white

VB 80 ADR SS / VB 100 ADR Al with pressure relief

Plug for TW female couplers
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

Hose assembly with STKC 75

Storz coupling with Spannloc clamps

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

DN 2" Ms

Double nipple brass

Elaflex Hamburg

Stock special flanges, pick by voice

Rail tanker discharge coupling KWK, with elbow DN 80

for damaged / dirty rail tanker or other threaded hose connections. Used e.g. for environmental protection trucks

Offshore FSRU (Floating Regasification Unit), Unloading Gasoil Sludge

TW hose assemblies, reels

ERV-G ... TW

Aircraft refueller

ZVA 25 nozzle, Slimline hose assembly

Dispenser for truck refuelling

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Elaflex hoses

PTFE, FEP, HD, UTS

LNG Refuelling

LNG Nozzle 'N-LNG' coupled to fuel, LNG 25 fill hose assembly, vent hose assenbly with 'VC-LNG'

Boat refuelling

ZVA Slimline 25, HD hose assembly

LNG ship bunkering

DCC Dry Cryogenic Coupling, CBC-PERC Cryogenic Breakaway Coupling

MK-A 80 SS, TW female coupler with Active Safeguard Lever, VB 80 SS

Pull slider to unlock

HD-C aircraft refuelling hose

VHD 63 C NEON

SG 1 1x0 SS for AdBlue Nozzles

Attach on dispenser side of swivel

VX 50-2" NPT SS

Male hose coupling 2" NPT of stainless steel with Spannfix clamp

Hose Reels group picture

Movable, pneumatic rewind system, active Vapour Recovery (VR) for gasoline fuels

PAL hoses for the chemical industry

Road tanker with open hose reel, HD hose assembly, ZV 500 nozzle

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

SG 1" 1x0 Al Propeller

Sight Glass with propelller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Oasis FV103 with NC203 P30, Light Duty Fill Valve and Transit Nozzle for CNG

DDC-M 65-2 1/2" Al

MannTek Dry Disconnect Coupling, aluminium