Media Library / Images

Hose assembly with STKC 75

Storz coupling with Spannloc clamps

Automatic lathing machine, production of brass swivel parts

AMX 50 PA

Ammoniac hose to EN ISO 5771 for water-free, liquid and gaseous ammonia.

ZVA AdBlue® HV, SSB 16 SS / BS 16, SL 16 AdBlue

Urea solution (DEF, ARLA 32) for trucks: nozzle, Safety Break / Break Sleeve and hose assembly

Universal hose assembly

PCS 75 (Polypal Clean DN 75 mm) with MX 75-3" SS and DDC-M 80-3" SS Dry Disconnect Coupling

TWO 100

TW coupling seal for Tank truck couplings DN 100 to EN 14420-6. NBR black.

ERV-G 80.TW

Yellow Band rubber expansion joint with TW flanges

Production MannTek, Sweden

HD 32 C

Yellow Band' aircraft refuelling hose, suitable for all aviation gasolines and jet fuels (JET A 1), deicing fluids and motor oils. Temperature range - 30° up to + 90° Celsius. Electrical resistance between 1,000 and 1 million Ohm.

Production plastic parts

Injection Molding

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

SVX 50-2"

Male hose coupling of steel with Spannfix clamps

UTL 50 universal hose with MannTek Dry Disconnect Coupling DDC-M 65 - 21/2" Ms

Ship loading with chemicals

UTS 150 hose assembly, ARK-S Safety Break Coupling

ERV-W 80.16

WHITE BAND Rubber Expansion Joint for foodstuffs, also containing oil and fat. Liner corresponds to Recommendation XXI of BfR and FDA-21CFR 177.2600. Not approved for drinking water. Temperature range (depending on medium) - 20° C up to + 90° C, temporarily up to 100° C. Electrically non-conductive.

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

DCC Dry Cryogenic Coupling for LNG

Coupling process

Production MannTek, Sweden

ZVG 2 K (Korea)

suitable for passenger and heavy duty vehicle refuelling in markets utilising the 'J15' fill point receptacle.

GasGuard LPG nozzle GG20DN

With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.

DDC-M 80-3" Ms

MannTek Dry Disconnect Coupling, DN 80, gunmetal

MannTek DGC DryGasCouplings for L.P. Gas

DGC-M 50-2" with DDC-S dust plug

Forklift refuelling with LPG (L.P. Gas, Autogas)

GasGuard nozzle, LPG 16 hose; dispenser

LeverAssist hold-open aid for ZVA Slimline 2 nozzles

Detail

Road tanker with hose reel -

Quick change system between ZV 500 and ZVA 32 nozzles via DDC Dry Disconnect Coupling

Ship bunkering

FHD hose assemblies

ZH 50.2

High performance manual operated dispensing nozzle, for Diesel, heating oil, viscous gear and motor oils, max. flowrate 450 litres/min.

Elaflex hoses

FEP, UTS, PCS, HD, LPG, PTFE, CHS

PSB Pump Safety Break for High Hose Dispensers

Picture shows separation of the Slimline hose assembly after a drive-off accident

RD 50 seal, NBR blue

for foodstuff threaded couplings