Media Library / Images

Rubber Expansion Joint ERV-G LT 80.16

YELLOW BAND LT expansion joints designed for low temperature applications for standard-conform petroleum based products, e.g. diesel, heating oil up to + 90° C, aviation fuels, petroleum up to + 60° C and gasoline up to + 40° C. Temperature (depending on medium) range - 40° C up to + 90° C, temporarily up to + 100° C. Electrically dissipative.

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

ERV Rubber Expansion Joints

Picture 5

Assembling Spannloc hose fittings

Sample Collection Unit

DDC-M 25 Dry Disconnect Couplings and HD hose assembly for sample collection of aircraft fuel

ELAFLEX Hamburg, large new narrow aisle stock 2018 for hoses

Vehicle refuelling with LPG (L.P. Gas, Autogas)

GasGuard GG20 ACME nozzle

SMS 19-3/4"

Steam hose couplings of steel to EN 14423. With bolted clamps of hot stamped brass. For saturated steam hoses up to 220° C, compressed air, oxygen, oils up to 25 bar W.P. Hose tail and union nut of steel Zn / Cr.

ZVA Slimline 2 GR, black, guard 3 - bottom view

BK 3 Ms

Cap with 3" female BSP thread, brass

Production MannTek, Sweden

Swivels DG of stainless steel

Swivels serve to avoid hose torsion (increase of life span) and help for easier handling

Boat refuelling: ZVA Slimline 2

Netherlands

Tank truck and trailer with HD 45 hose reel, ZV 500 nozzle

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ZVA Slimline 2 nozzles with splashguard, Slimline hose assemblies

Refuelling at a petrol station in the United Arab Emirates

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Safety Swivel Break SSB 16 SS of stainless steel f. ZVA HV for AdBlue®

new design

Road tanker with hose reel -

Quick change system between ZV 500 and ZVA 32 nozzles via DDC Dry Disconnect Coupling

Adapter / Safety Breakaway Coupling for rail tanker loading / unloading

SBC 100 Safety Breakaway Coupling with RV-KW 51/2", RV-VK 80

Elaflex hose assemblies, nozzles and Rubber Expansion Joints for the chemical industry

Colour production: mixer

UTS hose assemblies

ZVA Slimline 2 GR nozzle

with Coax hose assembly (one side open end, inner vapour hose visible)

ZVG 2 ACME / EURO / DISH

Nozzles for L.P. Gas (Autogas) refuelling

ZVF 50 JET

Manual aviation fuelling nozzle for overwing service. Flowrate up to 400 ltr. / min. (85 IGM – higher flowrates are possible). Size DN 50. Working pressure PN 10 (140 psi). Temperature range - 40° C up to + 55° C.

ZVF 25 for aircraft refuelling

dust cap and ground cable assembly

V 16-3/4"

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, yellow.

IBC loading and unloading

MannTek DDC-M 50, FWS 50 PTFE

Oasis FV103 with NC203 P36, Light Duty Fill Valve and Transit Nozzle for CNG

ERV-R

"Red Band" Rubber Expansion Joints / ship engine room