Media Library / Images

ZVA HV for AdBlue®, SSB 16 SS, SL 16 for AdBlue®, Elafix 40

Urea solution (DEF, ARLA 32) for trucks: nozzle, Safety Break, hose assembly and adapter for the vehicle AdBlue^® filler inlet to avoid misfuellings.

Elaflon Plus FEP 25

Universal hose ELAFLON PLUS FEP with seamless FEP lining, resistant to all commonly used chemicals, see resistance chart. Suitable for both suction and delivery (Type FEP D = delivery only). W.P. up to 16 bar, burst pressure > 64 bar. Temperature range from - 30° C up to + 100° C, briefly up to 130° C. Steaming out for cleaning and sterilisation permissible up to 150° C, max. 30 min (open system). Meets EN 12115.

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

V 16-3/4"

Male ferrule hose coupling EN 14424, reusable. Slimline 16 hose, red.

SG 1" 1x0 Al Propeller

Sight Glass with propelller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

HD-C LT, Low Temperature

Antarctica: Low Temperature aircraft refuelling hoses in action; fuel transfer from drums via mobile pump

AMKI 50 SS, AVKI 50 SS

'Camlock' stainless steel female and male coupling to EN 14420 - 7

GasGuard LPG nozzles: optional Magnet in the guard

For contactless activation of dispensers with reed switch technology

DDC-V 50 SS F

MannTek Dry Disconnect Coupling, DN 50, stainless steel, with flange connection

RS 2 x 78 SS

Reducer Female/Male

Terminal / gantry: 'Polypal Oil' hose assemblies for bottom loading of road tankers

Lining UPE - resistant to all petrochemical media, also with high content of aromatics or other aggressive additives; cover CR - oil resistant

SFX 50.16

hose flange; hose tail and swiveling flange of steel, Spannfix clams

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, blue.

ZVA Slimline 2 GR, special type with bellows, black, guard 3 - side view

Oasis SV108_SV104 Sandwich Valves with handle, for CNG

ELAFLEX Hamburg

Hose assemblies, testing electrical conductivity

ELAFLEX quality: section view of a ERV bellows

Nozzles and hose assemblies for the forecourt

ZVA Slimline 2, ZVA Slimline 2 GR, Slimline hose assemblies

Production MannTek, Sweden

ZVF 50 helicopter refuelling with HD-C hose assembly

France

VK 50 SS

TW male coupling stainless steel

Stainless steel Hose Reel with pneumatic rewind system, HD 50

ZVF 25 for aircraft refuelling

dust cap and ground cable assembly

ContiTech Production ERV

Vulcanisation

Ship bunkering with STW hose assembly and MannTek DDC Dry Disconnect Couplings

Scandinavia

SD 38 Pyropal

Steam hose with steel braids for wet saturated steam up to 18 bar (210° C) and hot water up to 120° C. For cold water up to 25 bar. Minimum burst pressure 180 bar (1 : 10 safety factor

MKX 80 Ms, coupling hose assembly

Refuelling with ZVA Slimline 2 nozzle

Scuffguard, Product Sleeve and Colour Sleeve in grey special colour

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.