Media Library / Images

Ship bunkering with LNG

DCC Dry Cryogenic Coupling with cap; CBC Cryogenic Breakaway Coupling

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

MB 50 TS SS Lockable fi ll pipe coupling

with VK 50 SS

ZVF 25 for aircraft refuelling

dust cap and ground cable assembly

ZVA-RG

Automatic nozzle ZVA DN 19, of red bronze (gunmetal), for solvents and corrosive media. Flowrate up to 60 l / min.

ELAFLEX Tanktechnik, Production Plettenberg / Germany

Manufacturing nozzle seat

Slimline dispensing hose SF (sulfur-free)

Fuel producers spend considerable effort in fulfilling the maximum allowed sulfur content. Rubber compounds of this hose type are free of sulphur – ensures that the sulphur content of the fuel is not increased, even if the medium remains for a long time within the hose

Hose assemblies for petroleum based procucts

LTW 75, VX 80-3, MannTek DDC-M80-3Ms & TW 63, SFX 63 TW

Simultaneous Refuelling/Filling of Diesel and AdBlue®

Picture 2

Production MannTek, Sweden

GasGuard LPG nozzle GG1EH

used for industrial refueling / attended refueling. With hybrid nose piece − low lever force. Release volume on valve closure: 1,7 cm³.

M 21-1" cr

Female ferrule hose coupling EN 14424, reuasable. Slimline 21 hose, green.

Orange Band L.P. Gas hose type LPG

Premium quality for highest safety and best handling

FWS 50 PTFE

Composite hose with PTFE lining

Hose Safety Break for LPG

ARK 19

Rail tanker loading and unloading of petroleum based products

ZVG 2 K (Korea)

LPG nozzle for vehicle refuelling with liquefied petroleum gas (propane, butane and mixtures) up to 50 l / min. Working pressure 25 bar. Test pressure 40 bar. Burst pressure > 100 bar. Temperature range - 25° up to + 70° C, 'LT'-Type down to - 40° C.

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ELAFLEX Hamburg

NB-ZVF 50 SR, ER 583 PTL, HD-C 38

Nozzle boot f. ZVF 50 with additional spout retainer

VC 75-3" SS / SS

Spannloc threaded hose coupling with BSP male thread / Spannloc of stainless steel

DDC-V Dry Disconnect Couplings for various media

tank storage; TW hose assembly

Solvent filling with integrated vapour recovery in the nozzle

ZVA 25 GR, UTS hose assemblies

ZVF 50 JET

with HD-C NEON hose assembly

Hose assemblies

for saturated steam, chemicals, petroleum based products

Road tanker reel with HD 50 hose assembly, ZV 500 nozzle

FWS composite hose / hose assembly

Type FWS PTFE with male threaded fitting VPH-SS

LBS 50 hose assembly for foodstuffs, FDA conform

with RMC 50 SS/SS (DIN 11851 foodstuff threaded coupling and Spannloc clamps of stainless steel)

IBC metal container; UTS hose assembly