Media Library / Images

TGN 2" Al (TGN 50 Al)

Tank truck flange aluminium, one end flange to DIN 28462, other end male BSP thread.

CSB 21 Coax Safety Break: Separation

ERV-G Yellow Band rubber expansion joints, manhole of a petrol station

Bellows ERV-GR (Green Band) without flanges, with VSD vakuum support spiral

VSD: to increase vacuum resistance of a chosen ERV type. Open ring of stainless steel 1.4571

Hose Reel with hydraulic rewind system orange, LPG 32, DGC-M 50

ERV-GR 80.16 ZS 2

GREEN BAND Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

ZVA 25 spout with stainless steel tip

TWD-TM coupling seal

PTFE encapsulated

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

ERV VSR:

ERV with vacuum support ring. Ring of AISI 316 Ti , used when the vacuum resistance of the chosen ERV is not sufficient.

M 16-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 16 hose, yellow.

Production plastic precision parts

LeverAssist hold-open aid for ZVA Slimline 2 nozzles

Detail

Sample Collection Unit

DDC-M 25 Dry Disconnect Couplings and HD hose assembly for sample collection of aircraft fuel

Storz Safety Couplings Type SHK

upon uncoupling, the safety dust plug first falls into holding claws, relasing an eventual pressure within the system. Only then the dust cap can be fully taken off. - increased protection for the operating personnel. Easy to use, no additional pressure release necessary, slim design, does not build up, no freezing up in the dome section.

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Ship bunkering

FHD hose assemblies

NB-ZVF 50 SR, ER 583 PTL

Nozzle boot f. ZVF 50 with additional spout retainer

ERV VSD:

ERV with vacuum support spiral. Spiral of AISI 316 Ti, used when the vacuum resistance of the chosen ERV is not sufficient.

From Terminal To Nozzle

Elaflex refuelling equipment

NB-ZVF 50

Noozle Bootsfor ZVF 50 JET Overwing Nozzle

AMKC 50 Ms

'Camlock' brass steel coupler to EN 14420 - 7 with hose tail and Spannloc clamps

Oasis TH Tank Head Valves, CNG trailer

ERV-G AF

Suitable for piping systems of aviation refuelling or dispensing vehicles in accordance to EN ISO 1825/EI 1529. Suitable for all aviation fuels.

Camlock Cam Locking hose tail AMK-St 50 Ms (brass)

for the assembling with Spannfix or Spannloc clamps

AKD 19 Hy

CouplingSeal CSM

Oasis FV103 with NC203 P30, Light Duty Fill Valve and Transit Nozzle for CNG

SG 1 1x0 SS for AdBlue® Nozzles

Attach on dispenser side of swivel

HD 50 C, HD 10 C

Yellow band aircraft refuelling hose and sensing hose

Fluorline EFL 21

Universal pump hose DN 21 for chemicals, petroleum based products, for propane, butane and other L.P. gases, as well as solvents. Ideal for highly sensitive media such as AdBlue^® urea solution. Temperature range - 40° to + 100° C. Burst pressure > 64 bar.