Media Library / Images

ZVA Slimline 2, SSB 16, Slimline 16 hose assemblies

Maroc, motorcycle refuelling

SD 38 Pyropal

Steam hose with steel braids for wet saturated steam up to 18 bar (210° C) and hot water up to 120° C. For cold water up to 25 bar. Minimum burst pressure 180 bar (1 : 10 safety factor

Polypal Clean hose assembly

Pharmaceutical production

Fuel delivery at the petrol station

LTW 75 fuel delivery hose, GPS 50 vapour balance hose

Bunker boat: HD hose assemblies on reel, ZV 500 nozzle

Section view of a DRIP STOP spout

for ZVA Slimline 2 nozzles - stops dripping Diesel

Nozzle boot NB-GG

for GasGuard LPG nozzles

SG 1" 1x0 Al

Sight Glass with propeller, to EN 13617-1, DN 25, for installation between petrol station nozzle and hose assembly, or mounting on the dispenser. For the visual control of bubble-free dispensing and fuel colour (e. g. for premium fuels). Suitable for all standardised gasoline and diesel fuels according EN 589 + EN 590, including ethanol or biodiesel content, also Avgas and Jet-A1.

Quick Tester GR 92

for the simple Yes / No functioning test of vapour recovery

Large reel, HD hose assembly, ZH 50 nozzle

LNG ship bunkering

DCC 100 Dry Cryogenic Coupling, CBC 100 PERC Cryogenic Breakaway Coupling

ELAFLEX seals

EA 866 scuffguard: fuel grade identification 'LPG' to standard

The scuffguard for LPG / Autogas nozzles shows the LPG fuel grade marking required by standard, and offers a large advertising space

Assembling "ZS" tie rods to ERV rubber expansion joints

VB 80 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

VB 50 P, VB 80 P

TW dust plugs of Polyamide

Hose Connection with TW coupling, TSG 3" Sight Glass

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

Rose Reel spring rewind white, HD 38 C, ZVF 50

Coax hose assembly, section view

Spannfix safety clamps SX 75 SS of stainless steel

Elaflex hose assemblies and Rubber Expansion Joints for petroleum based products

Oasis FV103 45° Fill Valve, for CNG

Slimline 21 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

TWO 100

TW coupling seal for Tank truck couplings DN 100 to EN 14420-6. NBR black.

Swivels DG 25 SS, DG 38 SS, DG 50 SS with hose assembly

Swivels serve to avoid hose torsion (increase of life span) and help for easier handling

Safety Swivel Break

SSB 16 SS

Motorcycle refuelling at the petrol station

ZVA Slimline 2 GR, Germany

Vehicle refuelling with LPG (L.P. Gas, Autogas)

ZVG 2 EURO

Rubber Expansion Joint ERV-CR 80.16

CR Expansion Joints for cold and warm water, swimming pool water, sea water, waste water (weakly sour or alkaline) also oil containing, cooling water with protective oils against corrosion, lubricating oil, grease and air, compressed air. Temperature range (depending on medium) - 25° C up to + 90° C, temporarily up to + 100° C. Electrically non-conductive.

Compact Line HD 50, Hose Reel Spring Rewind

FEP 5O, MannTek DDC-M 5O SS